Overview
The ideal filler when you need a quick or last-minute repair on your interior walls or woodwork. The ready-mixed formulation quickly fills holes up to 10mm and leaves a tough finish that can be drilled or decorated in 30 minutes. Available in a ready mixed tube or tub for easy application.
- Dry in only 30 minutes
- Can be drilled and painted
- Fills holes up to 10mm in one application
- Easy to apply - ready mixed formulation
| Area | Interior |
| Recommended Use | Interior surfaces such as plaster, stone, concrete and wood |
| Drying Time | 30 minutes |
| Re-Coat Time | 30 minutes |
| Recommended Coats | As required |
| Application Method | Filling knife or similar tool |
| VOC Levels | Minimal |
Preparation
Ensure the surface to be repaired is clean, dry and free from dust and grease.
Application
We recommend performing a test to ensure compatibility with the surface, always follow the manufacturer's instructions found on the packaging.
- Firmly push the filler into the area of repair leaving it slightly raised above the surface.
- Before it dries, smooth it over with a wet knife so it is level with the surface.
- Allow to dry for 30 minutes, your surface can now be painted or sanded.
- For repairs deeper than 10mm fill in layers allowing 30 minutes between each layer.
